|
| Date |
Start |
End |
Hrs:Mins |
Task |
| 01/26/97 |
4:30:00 PM |
6:30:00 PM |
2:00 |
Remove front bumper,
tow hooks, rear hooks, start removal of bumperettes |
| 01/26/97 |
9:35:00 PM |
10:05:00 PM |
0:30 |
Remove hood latch, top
assemblies @ tub, blackout light |
| 01/26/97 |
10:05:00 PM |
10:35:00 PM |
0:30 |
Remove reflectors |
| 01/26/97 |
10:35:00 PM |
10:50:00 PM |
0:15 |
Tested disc sander on
body - OK |
| 02/02/97 |
1:50:00 PM |
1:55:00 PM |
0:05 |
Remove driver side
mirror |
| 02/02/97 |
2:05:00 PM |
2:18:00 PM |
0:13 |
Install rear spring
shackle |
| 02/02/97 |
2:18:00 PM |
3:10:00 PM |
0:52 |
Remove right rear
bumperette, finish left rear |
| 02/02/97 |
3:19:00 PM |
3:35:00 PM |
0:16 |
Remove gas filler neck
cover plate |
| 02/02/97 |
3:35:00 PM |
3:45:00 PM |
0:10 |
Remove battery cover
bolts |
| 02/02/97 |
3:45:00 PM |
3:52:00 PM |
0:07 |
Remove hood secure
latch's on windshield |
| 02/02/97 |
3:52:00 PM |
4:52:00 PM |
1:00 |
Work on left front
quarter cleaning underneath |
| 02/02/97 |
4:52:00 PM |
5:15:00 PM |
0:23 |
Remove drivers side
civil defense sticker |
| 02/15/97 |
4:30:00 PM |
5:15:00 PM |
0:45 |
Scrape loose
paint |
| 03/08/97 |
2:00:00 PM |
3:00:00 PM |
1:00 |
Scrub gas tank, 3 rims
and tires |
| 03/08/97 |
3:00:00 PM |
3:20:00 PM |
0:20 |
Install 3 tires/rims
(military rims) |
| 06/27/97 |
5:15:00 PM |
7:15:00 PM |
2:00 |
Sand left quarter to
metal |
| 06/28/97 |
12:00:00 PM |
2:00:00 PM |
2:00 |
Sand left quarter |
| 07/27/97 |
12:00:00 PM |
3:00:00 PM |
3:00 |
Sand left side, prime
all bare metal |
| 09/07/97 |
8:00:00 AM |
6:00:00 PM |
10:00 |
Sand tailgate, right
side, and prime |
| 09/23/97 |
5:00:00 PM |
11:00:00 PM |
6:00 |
Remove hood, front
fenders, grill, radiator, start harness |
| 09/24/97 |
12:00:00 PM |
2:00:00 PM |
2:00 |
Remove wire harness,
windshield, battery box, started dash |
| 09/24/97 |
3:00:00 PM |
5:00:00 PM |
2:00 |
Remove firewall stuff,
dash, glovebox, battery box, wire harness |
| 09/25/97 |
11:30:00 AM |
1:00:00 PM |
1:30 |
Remove all cover
plates, park brake, gas line, remaining attachment points |
| 09/25/97 |
2:00:00 PM |
5:30:00 PM |
3:30 |
Remove body bolts, take
body off, scrape grease blobs |
| 09/25/97 |
6:20:00 PM |
8:20:00 PM |
2:00 |
Scrape gunk, oil,
dirt. Prep for pressure
wash |
| 09/26/97 |
10:00:00 AM |
11:00:00 AM |
1:00 |
Gunk frame/chasis at
pressure wash |
| 09/26/97 |
3:00:00 PM |
5:30:00 PM |
2:30 |
Load body, fenders,
grill, hood, dash, cover plates.
Take to sandblaster |
| 09/29/97 |
10:00:00 AM |
11:30:00 AM |
1:30 |
Purchase DP74 epoxy
primer, deliver to sandblaster |
| 09/30/97 |
12:30:00 PM |
4:00:00 PM |
3:30 |
Remove shocks, fuel
line, brake line, skid plates, transfer case, ignition box/plate,
clutch/brake assemblies, master cylinder, heat shield, exhaust pipe |
| 09/30/97 |
5:00:00 PM |
7:00:00 PM |
2:00 |
Loosen engine mounts,
x-fer case cross member, remove frame tie down points, remove fuel
line |
| 10/01/97 |
10:10:00 AM |
11:50:00 AM |
1:40 |
Remove engine/transfer
case assembly, remove steering assembly arms (tie rods), remove x-fer case
cross member |
| 10/01/97 |
4:30:00 PM |
7:00:00 PM |
2:30 |
Remove springs from
frame. Split engine from bell
housing, remove radiator arms |
| 10/02/97 |
12:00:00 PM |
7:00:00 PM |
7:00 |
Split tie-rod ends from
steering knuckles and remove, load frame and x-fer cross member and
new/old gas tank pan on JD trailer.
Take to Dannys, p/u 16' trailer, load tub and parts from BIC
sandblasting, home and unload |
| 10/03/97 |
9:00:00 AM |
10:00:00 AM |
1:00 |
Prepare paint booth at
home |
| 10/03/97 |
10:00:00 AM |
12:00:00 PM |
2:00 |
Apply primer (PPG DP74
2 part red epoxy) |
| 10/03/97 |
1:00:00 PM |
2:00:00 PM |
1:00 |
Apply Primer |
| 10/03/97 |
2:00:00 PM |
2:30:00 PM |
0:30 |
Clean-up spray gun and
area |
| 10/03/97 |
2:30:00 PM |
3:00:00 PM |
0:30 |
Remove springs from
axles |
| 10/04/97 |
11:00:00 AM |
12:00:00 PM |
1:00 |
Start painting |
| 10/04/97 |
1:00:00 PM |
3:20:00 PM |
2:20 |
Finish painting |
| 10/04/97 |
3:20:00 PM |
4:20:00 PM |
1:00 |
Clean-up |
| 10/14/97 |
10:00:00 AM |
2:00:00 PM |
4:00 |
Purchase
replacement left rear spring, parts to Kurachi, |
| 10/15/97 |
8:30:00 AM |
9:00:00 AM |
0:30 |
Appt for engine
hoist/steam clean, record maintenance ID tag info. |
| 10/15/97 |
12:00:00 PM |
4:00:00 PM |
4:00 |
Sanded dash board, 1/3 hood |
| 10/24/97 |
1:00:00 PM |
4:00:00 PM |
3:00 |
Sand/paint spring
mounting plates, u-bolts and press spring bushings |
| 10/29/97 |
12:00:00 PM |
3:30:00 PM |
3:30 |
Sand/paint tie frame
tie-downs, master cylinder bracket, purchase fuel line, clean brake lines,
install brake lines |
| 11/04/97 |
12:00:00 PM |
2:00:00 PM |
2:00 |
Purchase shocks,
Sand/paint shocks |
| 11/05/97 |
1:00:00 PM |
5:00:00 PM |
4:00 |
Sanded/painted
pkg brake lever, oil bath, headlight trim rings, u-bolts, dash plate, dash
grab rail, engine mounts, |
| 11/05/97 |
6:00:00 PM |
10:00:00 PM |
4:00 |
Bent/created Fuel Line,
Installed in frame, cleaned threads on spring plates/u-bolts and nut
threads |
| 11/14/97 |
12:00:00 PM |
4:00:00 PM |
4:00 |
Sand/paint brake drums,
steering column, start steering linkage |
| 11/05/97 |
12:00:00 PM |
5:00:00 PM |
5:00 |
Sand/paint misc
parts |
| 11/05/97 |
6:00:00 PM |
10:00:00 PM |
4:00 |
Clean threads of
springs, bend/install fuel line |
| 11/18/97 |
10:00:00 PM |
12:00:00 AM |
2:00 |
Install rear
bumperetts, towhooks, front bumper, front tow hook mounts |
| 11/19/97 |
2:00:00 PM |
4:00:00 PM |
2:00 |
Install xfer cross
member, loosely install clutch/brake assy, finish front bumper
installation |
| 11/22/97 |
1:00:00 PM |
2:00:00 PM |
1:00 |
Disassemble frt
steering/tie-rod end assys, p/u axles from Jeep Masters |
| 11/24/97 |
12:00:00 PM |
2:00:00 PM |
2:00 |
Sand/paint tie rods,
bellcrank |
| 11/25/97 |
8:30:00 PM |
12:00:00 AM |
3:30 |
Install frt/rear
springs to axles, axles to frame, and rear shocks |
|
|
|
0:00 |
IT'S A ROLLING
CHASSIS! |
| 11/26/97 |
1:00:00 PM |
3:00:00 PM |
2:00 |
Finish rear shocks,
loosely install bellcrank, clutch/brake pedal assemblies |
| 12/01/97 |
3:30:00 PM |
6:30:00 PM |
3:00 |
Torqued shocks
@30ftlbs, pivot spring bolts at 30ftlbs, spring ubolts @60ftlbs, tie rod
and tie rod ends w/cotterpins bellcrank thru bolt and clamp. Installed master cylinder, hooked
up brake lines |
| 12/02/97 |
12:30:00 PM |
1:00:00 PM |
0:30 |
Torqued left rear shock
plate, aligned front end, tighten tie rods. zero degree toe-in. |
| 12/03/97 |
1:30:00 PM |
5:30:00 PM |
4:00 |
Remove xfer case from
block, remove clutch plate, clutch disc and flywheel. Remove flywheel plate, starter,
oil press sending unit/lines, carb/plate/linkage, fan/pully assy,
generator/bracket, frt skid plate, fuel pump, oil filter, exhaust,
distb, |
|
|
|
0:00 |
fording valve, valve
cover and right side valve guide cover plate. |
| 12/12/97 |
|
|
0:00 |
Take windshield to
vision glass to remove glass |
| 12/16/97 |
|
|
0:00 |
Pickup longblock from
Pflugerville Machine shop |
| 12/19/97 |
5:30:00 PM |
6:00:00 PM |
0:30 |
Unpack box's from Army
Jeep Parts and Midwest Military.
Remove old fan blades from old water pump, remove old plug wired
from old distributor. |
| 12/30/97 |
10:03:00 AM |
5:03:00 PM |
7:00 |
Degrease, sand, paint
valve cover, side cover, dipstick tube, oil sender bracket, headlight
rings, water pump, generator brackets, fan assy. |
| 01/04/98 |
12:30:00 PM |
3:30:00 PM |
3:00 |
Clean fuel lines,
fittings w/wire wheel. Clean
distributor lines |
| 01/05/98 |
1:30:00 PM |
5:00:00 PM |
3:30 |
Continued wire brushing
fuel/vent lines, engine nuts and bolts etc. Trying to salvage as much as
original! |
| 01/19/98 |
2:00:00 PM |
5:00:00 PM |
3:00 |
Pulled
off remaining brass fittings to be cleaned, installed oil sending bracket,
lr top brass fitting, valve train cover side plate, throttle linkage,
fording valve. Remove oil
filter from bracket. Remove brass fitting on valve cover for cleaning,
|
| 01/19/98 |
5:00:00 PM |
7:00:00 PM |
2:00 |
Cut rubber for battery
tray bottoms, straighten radiator fins, remove radiator fan shroud, paint
lift hook OD, attach front skid plate, install dipstick tube, sorted parts
to continue, started to sand xfer shift levers. |
| 01/20/98 |
1:00:00 PM |
4:00:00 PM |
3:00 |
Disassembled/Sandblasted oil filter assy, wire brushed more
parts. Purchased
hardware |
| 01/20/98 |
4:45:00 PM |
5:15:00 PM |
0:30 |
1st coat of black paint
on oil filter assy, installed water nect for thermostat |
| 01/22/98 |
11:45:00 AM |
12:45:00 PM |
1:00 |
Install throttle
linkage on 1 head bolt, remove tow hook, install oil filter canister,
reinstall tow hook, insert oil filter into canister, loosley attache
rubber lines. |
| 01/23/98 |
11:00:00 AM |
12:00:00 PM |
1:00 |
Bleed brakes (Still
air) |
| 01/23/98 |
1:00:00 PM |
4:30:00 PM |
3:30 |
Adjust brakes linings,
bleed (still air) |
| 01/23/98 |
4:30:00 PM |
6:00:00 PM |
1:30 |
Install oil pump,
waterpump, distributor, plugs, valve cover, plug wire holders |
| 01/24/98 |
12:00:00 PM |
3:00:00 PM |
3:00 |
Tried to remove
steering wheel, no luck |
| 01/25/98 |
2:00:00 PM |
4:00:00 PM |
2:00 |
Sand/paint radiator
shroud and front tow hooks |
| 01/27/98 |
|
|
0:00 |
Drop off radiator at
Klingmann, drop off steering wheel with Jeep Masters |
| 01/28/98 |
|
|
0:00 |
P/U radiator and
steering tube assy |
| 02/04/98 |
1:00:00 PM |
3:30:00 PM |
2:30 |
Dismantle/clean
steering box, pitman arm, bearings, races |
| 02/04/98 |
4:45:00 PM |
6:30:00 PM |
1:45 |
Tighten spark plugs,
install plug wires/carb/back vent lines/oil filter and lines/water temp
sending unit/fuel pump/front vent lines |
| 02/05/98 |
2:15:00 PM |
2:45:00 PM |
0:30 |
Install exhaust
manifold |
| 02/08/98 |
12:30:00 PM |
1:30:00 PM |
1:00 |
Clean pressure plate
assy of cosmoline |
| 02/08/98 |
1:30:00 PM |
1:45:00 PM |
0:15 |
Measure oversize
channel for body work |
| 02/24/98 |
12:00:00 PM |
4:00:00 PM |
4:00 |
Measure oversize
channel for body work, order materials from metal shop, trip to Texas
Alternator for generator/starter evaluation |
| 02/26/98 |
9:30:00 AM |
12:00:00 PM |
2:30 |
Finish assembly of
steering gear box/cover tube/bearings/side gasket. |
| 02/26/98 |
1:30:00 PM |
4:30:00 PM |
3:00 |
Install bell housing
shield, flywheel, pressure plate, clutch disc, mate transmission to engine
block |
| 03/06/98 |
1:00:00 PM |
2:00:00 PM |
1:00 |
Bellhousing bolt
install, install master cylinder, hookup frt/rear lines to master
cyclinder, install steering gear box. |
| 04/01/98 |
6:45:00 PM |
7:15:00 PM |
0:30 |
Install steering drag
link |
| 04/01/98 |
7:15:00 PM |
7:45:00 PM |
0:30 |
Install engine
mounts |
| 04/04/98 |
9:45:00 AM |
11:25:00 AM |
1:40 |
Start install
engine/transmission/xfer case - Installed! |
| 04/04/98 |
11:25:00 AM |
2:15:00 PM |
2:50 |
Install propeller
shafts, rough wire harness located |
| 04/07/98 |
6:30:00 PM |
7:53:00 PM |
1:23 |
Loosely install exhaust
long pipe, muffler, extension |
| 04/07/98 |
6:53:00 PM |
8:15:00 PM |
1:22 |
Install clutch cable
boot |
| 04/07/98 |
8:15:00 PM |
8:20:00 PM |
0:05 |
Install steering gear
box lube- 90wgt |
| 04/09/98 |
6:20:00 PM |
8:38:00 PM |
2:18 |
Finish exhaust system,
tighten steering gear box cover plate bolts |
| 04/11/98 |
2:00:00 PM |
4:00:00 PM |
2:00 |
Cut/Install hat channel
underneath. |
| 04/25/98 |
12:30:00 PM |
12:38:00 PM |
0:08 |
Tighten fuel line
connects |
| 04/25/98 |
12:38:00 PM |
1:00:00 PM |
0:22 |
Wire harness
adjustment, Hook up brake electrical connections |
| 04/25/98 |
1:00:00 PM |
1:10:00 PM |
0:10 |
Install clutch/brake
springs to arms |
| 04/25/98 |
1:10:00 PM |
1:25:00 PM |
0:15 |
Install speedometer
cable |
| 04/25/98 |
2:00:00 PM |
2:50:00 PM |
0:50 |
Sand/Paint gear shift
levers |
| 04/25/98 |
2:50:00 PM |
4:00:00 PM |
1:10 |
Sand/Paint
starter/generator, first coat of paint |
| 05/02/98 |
9:55:00 AM |
10:00:00 AM |
0:05 |
Final exhaust hanger
bolt install |
| 05/02/98 |
1:00:00 PM |
2:35:00 PM |
1:35 |
Installed body
insulators, drilled out one hat channel hole, installed body! |
| 05/02/98 |
3:00:00 PM |
3:45:00 PM |
0:45 |
Installed starter,
generator, fan belts, brackets |
| 05/03/98 |
9:00:00 PM |
10:00:00 PM |
1:00 |
Dwaddle..lists, todo's,
Installed 2 red reflectors |
| 05/04/98 |
6:30:00 PM |
9:30:00 PM |
3:00 |
Bench wire wheel
another box of parts |
| 05/06/98 |
6:00:00 PM |
8:30:00 PM |
2:30 |
Clean/Sandblast more
misc parts, nuts, bolts etc |
| 05/09/98 |
12:00:00 PM |
1:00:00 PM |
1:00 |
Paint parts |
| 05/09/98 |
2:00:00 PM |
2:45:00 PM |
0:45 |
Install
generator/regulator box assy and cover plate |
| 05/09/98 |
2:45:00 PM |
3:45:00 PM |
1:00 |
Install right
fender |
| 05/09/98 |
3:45:00 PM |
5:45:00 PM |
2:00 |
Install battery
box/interior glove box |
| 05/09/98 |
5:45:00 PM |
6:00:00 PM |
0:15 |
Install parking brake
assy |
| 05/10/98 |
12:30:00 PM |
1:10:00 PM |
0:40 |
Painted more
parts |
| 05/10/98 |
1:10:00 PM |
3:30:00 PM |
2:20 |
Installed battery
cables, main wire harness, firewall coverplate, tighten wire harness,
install right headlight assy |
| 05/18/98 |
6:00:00 PM |
8:30:00 PM |
2:30 |
Install other headlight
ssy, install radiator and shroud assy, install hood brackets, install 1
"T" hood latch |
| 05/23/98 |
8:00:00 AM |
12:00:00 PM |
4:00 |
Paint dashboard,
windshield frame, inside of hood, clean 1919A4 |
| 05/23/98 |
3:00:00 PM |
3:15:00 PM |
0:15 |
Finalize interior
glovebox, install jerry can bracket |
| 05/25/98 |
11:30:00 AM |
11:45:00 AM |
0:15 |
Tape/paint stop/service
tail lights |
| 05/25/98 |
11:45:00 AM |
12:00:00 PM |
0:15 |
Install firewall
plates |
| 05/25/98 |
12:00:00 PM |
3:00:00 PM |
3:00 |
Install wire harness in
engine area, headlights, tails |
| 05/25/98 |
3:00:00 PM |
3:30:00 PM |
0:30 |
Install brake pedal and
dampner |
| 05/25/98 |
3:30:00 PM |
5:00:00 PM |
1:30 |
Install horn
groundwire, brake master elec connect, dashboard grab bar, w-shld lockdown
brackets, lower radiator hose, hookup stop/service lights |
| 05/26/98 |
6:00:00 PM |
6:15:00 PM |
0:15 |
Mount spare tire |
| 05/26/98 |
8:30:00 PM |
8:40:00 PM |
0:10 |
Install headlight
wiring into left headlight assy |
| 05/26/98 |
8:40:00 PM |
8:50:00 PM |
0:10 |
Wire master cylinder
again |
| 05/26/98 |
8:50:00 PM |
8:55:00 PM |
0:05 |
Paint skid plate,
bottom of oil pan |
| 05/26/98 |
8:55:00 PM |
9:05:00 PM |
0:10 |
Remove radiator welting
rivets |
| 05/26/98 |
9:05:00 PM |
10:05:00 PM |
1:00 |
Install new radiator
welting and rivets |
| 05/26/98 |
10:30:00 PM |
11:25:00 PM |
0:55 |
Install left
fender |
| 05/26/98 |
11:25:00 PM |
11:35:00 PM |
0:10 |
Install left fender
blackout light and bracket |
| 05/29/98 |
7:00:00 PM |
7:20:00 PM |
0:20 |
Install windshield
rubber gasket on bottom side of w-shld |
| 05/29/98 |
7:20:00 PM |
8:00:00 PM |
0:40 |
Install w-shld laydown
welting to s-whld brackets |
| 05/29/98 |
8:00:00 PM |
8:05:00 PM |
0:05 |
Install w-shld lockdown
bracket at center w-shld |
| 05/29/98 |
8:05:00 PM |
8:45:00 PM |
0:40 |
Install dashboard,
finish battery box |
| 05/29/98 |
8:45:00 PM |
9:00:00 PM |
0:15 |
Install
Windshield. |
| 06/06/98 |
9:00:00 AM |
10:00:00 AM |
1:00 |
Fix steering gear box
positioning |
| 06/06/98 |
10:00:00 AM |
10:10:00 AM |
0:10 |
Installed LT Rear
stop/cover behind light |
| 06/06/98 |
10:10:00 AM |
10:15:00 AM |
0:05 |
Installed gas tank
cover plate around neck |
| 06/06/98 |
10:15:00 AM |
10:25:00 AM |
0:10 |
Paint
throttle/choke/master elec switch |
| 06/06/98 |
10:25:00 AM |
11:00:00 AM |
0:35 |
Putz - little
stuff |
| 06/06/98 |
11:10:00 AM |
11:15:00 AM |
0:05 |
Install on/off ignition
switch |
| 06/06/98 |
11:15:00 AM |
12:00:00 PM |
0:45 |
Install choke/throttle
lines, mirror assy |
| 06/06/98 |
12:00:00 PM |
12:30:00 PM |
0:30 |
Clean/install glove box
latch |
| 06/06/98 |
12:30:00 PM |
12:50:00 PM |
0:20 |
Install master switch
(elec) on dash |
| 06/06/98 |
12:50:00 PM |
1:15:00 PM |
0:25 |
Install top bow tie
down brackets |
| 06/06/98 |
1:15:00 PM |
1:45:00 PM |
0:30 |
Install battery box
cover top for grins |
| 06/06/98 |
1:45:00 PM |
2:15:00 PM |
0:30 |
Loosley installed top
bows |
| 06/06/98 |
3:45:00 PM |
4:45:00 PM |
1:00 |
Started rear seat cover
- finished |
| 06/06/98 |
4:45:00 PM |
5:45:00 PM |
1:00 |
Complete drivers seat
canvas |
| 06/06/98 |
5:45:00 PM |
6:30:00 PM |
0:45 |
Passenger seat
canvas |
| 06/06/98 |
7:30:00 PM |
8:00:00 PM |
0:30 |
Install seats in
Jeep |
| 06/07/98 |
1:00:00 PM |
5:00:00 PM |
4:00 |
Take
apart guage panal, clean rings.
Sandblast/Paint air filter assy/horn/blackout light, |
| 06/07/98 |
8:15:00 PM |
9:00:00 PM |
0:45 |
Install horn, blackout
light, air filter assy |
| 06/10/98 |
8:15:00 PM |
8:30:00 PM |
0:15 |
Cleaned guages of
dirt/grime |
| 06/10/98 |
8:30:00 PM |
8:50:00 PM |
0:20 |
Air filter orientation
correction |
| 06/10/98 |
8:50:00 PM |
9:00:00 PM |
0:10 |
Fiddled w/wiper
motors |
| 06/10/98 |
9:00:00 PM |
9:10:00 PM |
0:10 |
Wire up fender blackout
light |
| 06/14/98 |
12:00:00 PM |
3:00:00 PM |
3:00 |
Sand/final paint of
hood, guage panal |
| 06/14/98 |
8:30:00 PM |
8:40:00 PM |
0:10 |
Install hood |
| 06/14/98 |
8:40:00 PM |
9:15:00 PM |
0:35 |
Install wiper
motors |
| 06/14/98 |
9:15:00 PM |
9:35:00 PM |
0:20 |
Started assy of guage
panal |
| 06/21/98 |
1:35:00 PM |
2:00:00 PM |
0:25 |
Install painted
hardware |
| 06/21/98 |
2:00:00 PM |
2:35:00 PM |
0:35 |
Worked on guage cluster
wiring |
| 06/27/98 |
10:00:00 AM |
1:00:00 PM |
3:00 |
Installed top radiator
hose, throttle linkage, firewall grommets, patent plate, grease zerks,
hooked up battery posts, installed radio power feed, finished passenger
seat |
| 06/30/98 |
12:45:00 PM |
2:15:00 PM |
1:30 |
Installed master
cylinder top plug.
Bend/install fuel supply line, vent line gas tank pickup line and
filter. Started cleaning gas
tank. |
| 06/30/98 |
3:30:00 PM |
4:05:00 PM |
0:35 |
Cleaned gas tank, sand
and paint |
| 06/30/98 |
4:30:00 PM |
6:00:00 PM |
1:30 |
Worked on wire harness
to instrument cluster |
| 06/30/98 |
7:00:00 PM |
8:00:00 PM |
1:00 |
Install gas tank |
| 07/01/98 |
11:00:00 AM |
12:00:00 PM |
1:00 |
Sand/paint gas tank tie
down strap and windshield strap loop |
| 07/01/98 |
12:00:00 PM |
1:00:00 PM |
1:00 |
Worked on floor pan
installation |
| 07/23/98 |
11:00:00 AM |
1:00:00 PM |
2:00 |
Sandblast parts |
| 07/23/98 |
10:00:00 PM |
10:30:00 PM |
0:30 |
Paint parts |
| 07/26/98 |
12:15:00 PM |
12:20:00 PM |
0:05 |
Final paint of antenna
mount |
| 07/26/98 |
12:20:00 PM |
1:30:00 PM |
1:10 |
Install instrument
cluster |
| 07/26/98 |
1:30:00 PM |
2:00:00 PM |
0:30 |
Install floorboard
cover plates |
| 07/26/98 |
2:00:00 PM |
2:05:00 PM |
0:05 |
Install xfer boot
cover |
| 07/26/98 |
2:05:00 PM |
2:30:00 PM |
0:25 |
Install steering wheel
and horn |
| 07/26/98 |
2:30:00 PM |
2:50:00 PM |
0:20 |
Install brake pedal and
spring |
| 07/26/98 |
3:05:00 PM |
4:10:00 PM |
1:05 |
Install
topbow/shovel/jerry can straps |
| 07/26/98 |
4:10:00 PM |
4:55:00 PM |
0:45 |
Install wiper
arms/blades, top vacumme line, vacumme lines |
| 07/27/98 |
8:40:00 PM |
8:50:00 PM |
0:10 |
Install hose for wiper
motors and engine "T" |
| 07/30/98 |
12:05:00 PM |
12:45:00 PM |
0:40 |
Install radio mount
antenna base/mast |
| 07/30/98 |
1:00:00 PM |
1:15:00 PM |
0:15 |
Bend remaining vacumme
wiper line and paint |
| 07/30/98 |
1:30:00 PM |
2:00:00 PM |
0:30 |
Add
oil/coolant/water |
| 07/30/98 |
2:00:00 PM |
2:10:00 PM |
0:10 |
Attach radio power feed
ground wire |
| 08/11/98 |
6:30:00 PM |
6:35:00 PM |
0:05 |
Top off
collant/oil |
| 08/11/98 |
6:35:00 PM |
6:40:00 PM |
0:05 |
Hookup batteries |
| 08/11/98 |
6:40:00 PM |
7:05:00 PM |
0:25 |
Tried to start - No
go |
| 08/12/98 |
2:00:00 PM |
5:45:00 PM |
3:45 |
IT RUNS!!!! Rough, but
runs |
| 08/20/98 |
10:52:00 AM |
1:07:00 PM |
2:15 |
Swapped ignition wires
- tried to start no go |
| 08/20/98 |
1:45:00 PM |
4:50:00 PM |
3:05 |
Read a bit more, wiring
diagram in manual is wrong.
Pulled distributor for verification - OK. Checked all plugs for good
spark. Got to run!! Adjusted
timing to 5 degrees, air/fuel mixture not yet right. |
| 08/25/98 |
10:15:00 AM |
12:10:00 PM |
1:55 |
Hook up batteries,
started, tried air/fuel mix again.
Transmission not working in 4wd or Reverse/1st |
| 08/25/98 |
1:30:00 PM |
4:30:00 PM |
3:00 |
Got 16' trailer and
took jeep to Jeep Masters for carb, transmission, brakes |
| 09/14/98 |
10:00:00 AM |
2:00:00 PM |
4:00 |
Got 16' trailer and
took M416 to Kurachi for sandblast.
Pick up jeep from Jeep Masters |
| 09/14/98 |
6:30:00 PM |
7:45:00 PM |
1:15 |
Started stencils on
jeep |
| 09/15/98 |
4:00:00 PM |
6:00:00 PM |
2:00 |
Continued stencils,
road test, air'd up tires to 25psi |
| 09/18/98 |
4:30:00 PM |
5:30:00 PM |
1:00 |
Installed decals in
engine and drivers area, tighten water pump. Still leaking??? |
| 09/23/98 |
11:00:00 AM |
1:00:00 PM |
2:00 |
Sand/paint M416
parts |
| 09/23/98 |
4:35:00 PM |
5:00:00 PM |
0:25 |
Stencil under hood,
paint shovel |
|
|
|
|
|
|
|
Total Hours |
294:39 |
|
|
|
|
|
|
